LSR™

Large-Scale, High Solids Solvent Recycling System

The LSR™ Solvent Distillation system is the largest single-stage solvent distillation system in the industry. The LSR™ allows you to recover large quantities of waste solvent containing high solids content, reducing waste and cost.

Maximize Solvent Recovery:

  • cut virgin solvent purchase volumes
  • reclamation rates as much as 90%
  • reduce hazardous waste disposal volume
  • units typically pay for themselves in a few months

Reduced Environmental Impact & Increased Safety:

  • reduce the risks associated with large volumes of hazardous waste
  • reduce your facility’s environmental footprint

Interested in Solvent Recovery?

Just fill out some contact information and we'll be in touch.

Durable, Reliable, and Protected

PRI 10 Year Standard Limited Warranty

PRI solvent recovery systems carry the lowest life-cycle cost in the industry; over 75% of units sold in the last 15 years are still in service.

With proper care and maintenance, a PRI solvent recycling system can last for decades.  That’s why we’re not afraid to back it up with a 10-year limited warranty on the distillation vessel.  With PRI, you can trust that your solvent distillation system will be running for years to come.

Designed for More Solids!

Steeper Cone-Shaped Vessel Distributes Solids Efficiently

The inside of the LSR™ solvent recycler features a steep cone-shaped vessel, which enables the most efficient reclamation of solvent from heavily solids-laden waste streams; this allows for a more efficient transfer of heat.  The conical shape places the heat transfer source closer, and covers a larger contact area of the solvent mass.

As waste solvent is fed at the top of the cone, a steam jacket heats the cone, and the waste. The cone shape allows for a better transfer of heat throughout the vessel, and more solvent recovery from the waste stream.

Long-Term, Consistent Output

Scraper Blade Assembly

The LSR solvent recovery system is designed for maximum efficiency. Our patented scraper blade assembly:

  • cleans the heat transfer surface of sludge buildup for high efficiency
  • all the heat transfer area below the liquid operation level is cleaned
  • solids are rolled off the side walls and down into the conical bottom, speeding up the solvent distillation process
  • gently agitates and mixes the contents of the distillation vessel

Available Models:

 

 LSR-80 1544 L
(408 G)
422 L/h
(111 G/h)
3629 kg
(8000 lbs)
 LSR-120  2419 L
(639 G)
 568 L/h
(150 G/h)
 4536 kg
(10000 lbs)
 LSR-160  5288 L
(1397 G)
 1007 L/h
(266 G/h)
 5443 kg
(12000 lbs)
 LSR-200  9024 L
(2384 G)
 1514 L/h
(400 G/h)
 6804 kg
(15000 lbs)

Closed-Loop Solvent Recycling

Spent solvent collection, distillation, and clean solvent holding. Directly integrated into your process.

Our solvent recovery systems are often incorporated into a complete closed-loop solvent management system, utilizing PRI’s specialized and custom-designed Clean and Dirty Solvent Tanks with feeds.

In a closed-loop process, waste solvent is collected in a Dirty Solvent Tank, then piped to a Distillation System to separate the contaminants. Then, contaminants are discarded and reusable solvent is automatically sent to a Clean Solvent Tank, which feeds your production process. PRI can engineer solvent management systems to support parts washing, paint lines or other manufacturing processes where solvents are used.

Enter Your Keyword