
Container Washing Systems
A Range of Sizes & Container TypesOur line of wash systems are designed for a variety of applications and can be used to clean grease, oil, automotive lubricant, paint, coating, ink and more. Systems can be designed to use aqueous, caustic or solvent cleaning chemistries. Our systems can clean your containers with the chemistries which are most effective for removing your contaminants.
Mixing Vessel Washers
Clamshell spray or rotating brush systems
RotaJet by PRI™ (Model PW): designed for cleaning mixing vessels ranging from 61” (1550mm) tall with diameters from 24” (600mm) to 69” (1750mm). The dirty vessels are places onto the lifting lid. Once locked into position, the vessel is loaded into the wash chamber using a hydraulic jack system. The cleaning process is fully automated, and the vessels are washed, rinsed and dried, ready for production. Fumes are vented prior to opening the system, to limit employee exposure.
- high-pressure spray cleaning
- interior and exterior cleaning
- wash, rinse, dry cycles
- fume venting system
- explosion-proof
- pneumatic controls
Gemini by PRI™ GemiClean (Model VW): designed for cleaning mixing vessels ranging from 61” (1550mm) tall with diameters from 24” (600mm) to 69” (1750mm). The vessels are cleaned by a rotating brush and a spray nozzle assembly that self-adapts to the height and diameter of each vessel. The vessel is clamped in position by downward force by the lock-up cover. A tilting platform enables complete emptying of the vessels into a sedimentation or distillation system, to separate sediment from the cleaning agent and recycle.
- brush and spray cleaning
- interior cleaning
- wash, rinse, dry cycles
- fume venting systems
- compact footprint
- explosion-proof
- pneumatic controls
IBC, Tote, Drum & Pail Washers
RotaJet by PRI™ (Model D-60) drum, IBC, tote and pail washer systems are flexible to wash multiple container types. The systems can be used for decontamination of IBC’s prior to disposal or cleaning for in-house production. The modular system design allows clients to increase capacity by adding additional units. Once a wash cycle is complete, the interior of the wash chamber is vented prior to the door opening, limiting employee contact with fumes.
Small Batch Pail Washer
Small, compact system for pails and drums.
RotaJet by PRI™ (Model D-40): pail washing system is designed for low flash point flammable solvent cleaning. Dirty containers are loaded into the machine, the door is closed, and cycle started. The cleaning process is fully automated, and the containers are washed, rinsed and dried, ready for production.
- high pressure spray cleaning
- interior and exterior cleaning
- wash, rinse, dry cycles
- fume venting system
- compact footprint
- explosion-proof
- pneumatic controls
Single Drum Washer
Compact footprint, single drum system.
RotaJet by PRI™ (Model TL-DR-55): drum washing machines are designed for low flash point flammable solvent cleaning. Dirty, open-top 55 gallon drums are loaded into the machine, the door is closed and cycle started. The cleaning process is fully automated, and the drums are washed and ready for production. Cycle times are approximately 5 minutes.
- high pressure spray cleaning
- interior cleaning only
- wash, rinse, dry cycles
- simple design and operation
- compact footprint
- explosion-proof pneumatic controls
Closed-Loop Wash Systems
Completely integrated cleaning, designed to fit seamlessly into your operation.
Container Cleaning Systems can be designed to fit perfectly within your operation, with integrations into your water treatment system, production assembly line, paint filling line, or solvent recovery system.
Our wash systems are often incorporated into complete turn-key solvent recovery and recycling systems, using a closed-loop process. In this process, spent solvent is collected and fed into a distillation unit, where the contaminants can be separated from the reusable solvent. Contaminants are discarded and reusable solvent is automatically fed back through the cleaning process.